Using Your Gas Cooktop - Westinghouse WFE912SB User Manual

USING YOUR GAS COOKTOP

Using your gas hotplates
NOTE: Gas controls turn anticlockwise from 'Off' and
have limited movement.
Lighting tlhe burners
Electronic ignition
These hobs are fitted with mains powered electronic
ignition. When the appliance has been connected
and the power is on, depressing any knob will release
sparks to all burners. To light a burner, depress the
corresponding knob and while continuing to depress
knob turn anti-clockwise to 'HI' position. The knob may
be released once the flame is established, and turned
further anti-clockwise to r,educe the flame height
as desired.
WARNING
WARNING
• Keep hands clear of burners when lighting.
• If burner does not light within 5 seconds, turn knob
to 'Off' position, allow gas to disperse, then try
lighting again.
• Burners MUST be operated between 'HIGH' and
'LOW' settings only.
ENVIRONMENTAL TIPS ENVIRONMENT
To conserve gas, place the pan centrally over the burner
and adjust the flame so that it does not go past the edge
of the cookware.
NOTE: In the absence of electrical power, carry out
the ignition directly to the burner with a hand held
ignition source.
Model WFE912SB
1 4
1. Low heat burner (5.1MJ/h)
Used for simmering with small cookware items.
2. Medium heat burner (9.1MJ/h)
Used for normal cooking and simmering with mid
size cookware items.
3. High heat burner (12.1MJ/h)
Used for fast heating with large size cookware items.
4. Intense heat wok burner (14.4MJ/h)
Used for very fast heating with woks and other large
size cookware items. Use wok trivet provided when
cooking with a wok.
2
3
USING YOUR GAS COOKTOP
9