Table of Contents
Advertisement
Slot-in Installation
Slot in conversion
To convert the free standing appliance to a slot in
installation the kick panel provided on the appliance is
removed and the appliance is mounted on a plinth.
This enables a continuous cupboard kick board to be
installed, giving a more integrated appearance. There is
no clearance requirement between oven and adjacent
side cabinets.
600mm minimum
vertical clearance
from combustible
surfaces
To remove the appliance kick panel
•
Remove all loose parts i.e. Burner crowns and caps,
trivets, oven shelves.
•
Carefully lay down the appliance onto one side
onto foam packaging and remove the screws as
shown from each corner bracket.
900mm minimum
600mm
This surface is to be level
with the top edge of the
kickboard
Remove 4 screws on
each corner bracket
Remove 4 screws on
each corner bracket
SLOT-IN INSTALLATION
25
Advertisement
Table of Contents
