Westinghouse WFE912SB User Manual page 24

INSTALLATION OF THE APPLIANCE
Installation of anti-tilt brackets and hook
• The anti-tilt brackets must be secured to the floor at
rear of cavity with an appropriate fastener according
to dimensions in diagram.
• The hook is to be secured to the back wall in the
location shown above with an appropriate fastener
capable of withstanding a 10kg load (not supplied).
• Connect services to the appliance prior to placing
into cavity.
• To locate appliance, slide into cavity and ensuring
the rear left and right foot of appliance are captured
by the anti-tilt brackets.
• Before the appliance is fully pushed into position,
place the chain attached to the rear of appliance
onto the wall hook.
24
FREESTANDING INSTALLATION
Hole location for
hook installation
C
L
425
425
194 376
194
376
Measurements are to be adjusted to account
Measurements are to be adjusted to account for the thickness of any skirting
for the thickness of any skirting board or tiles board or tiles coming between the back of the appliance and the wall.
coming between the back of the appliance and
the wall
anti-tilt bracket
Hook
Appliance
Chain
installed
Wall