Brightness Control - Roberts Stream 207 Instruction Manual

Brightness control

The brightness of the display can be adjusted for when the radio is in
standby and for when it is in use. If you use the unit in the bedroom, you may
prefer a lower standby brightness level than the standard setting. There are
three Standby brightness levels and 3 levels for when the radio is in use.
1. Press the On/Standby button to switch on your radio. Access the
menu for the current mode by pressing the Menu button.
2. Rotate the Tuning/Select control until 'System settings' is highlighted
on the display. Press the control to enter the System Settings menu.
Rotate the Tuning/Select control until 'Backlight' is highlighted on the
display. Press the control.
3. To adjust the display brightness when the radio is switched on rotate
the Tuning/Select control until 'Normal' is highlighted on the display.
To adjust the display brightness when the radio is in standby rotate
the Tuning/Select control until 'Standby' is highlighted.
Press the control to enter the selected brightness adjustment mode.
The current setting will be marked with an asterisk.
4. Rotate the Tuning/Select control to choose either the High, Medium
or Low brightness level. Press the control to set the level.
Press the Menu button to exit.
When the radio is in Standby mode, pressing a button or turning a rotary
control will cause the radio to switch to the normal brightness level for a
few seconds. This is so that even if the standby brightness level is set
low, it is still possible to see the time when needed.
85
Main menu
DAB
FM
AUX in
Sleep
1,4
Alarms
System settings
System settings
Equaliser
Network
Time/Date
Backlight
2-4
Inactive Standby
Language
Brightness
Normal
Standby
Brightness
High
Medium
Low
*