Stereo / Mono Switching - Roberts Stream 207 Instruction Manual

Stereo / Mono switching

If the FM radio station being listened to has a weak signal, some hiss may
be audible. It is possible to reduce this hiss by forcing the radio to play the
station in mono rather than stereo.
1. Press the Mode button as needed to select the FM Radio mode display
and tune to the required FM station as previously described.
2. Press the Menu button to enter the FM menu.
3. Rotate the Tuning/Select control until 'Audio setting' is highlighted on
the display. Press the Tuning/Select control to enter the audio setting
mode.
The current setting is indicated with an asterisk.
4. To switch to mono in order to reduce the hiss from a weak FM signal
rotate the Tuning/Select control until 'YES' is highlighted. Press the
Tuning/Select control to confi rm the setting.
Alternatively, to return to the normal automatic 'stereo or mono' mode
rotate the Tuning/Select control until 'NO' is highlighted. Press the
Tuning/Select control to confi rm the setting.
5. Press the Menu button to return to the normal FM mode display.
71
Internet
Radio
1 DAB Radio
FM
Scan setting
Audio setting
2,5
System settings
Main menu
FM weak reception
3-4
FM weak reception
My Music
FM Radio AUX
FM Radio
Listen in Mono only?
YES NO
Listen in Mono only?