Brightness Control; Headphone Socket - Roberts Stream 94L Manual

Smart radio with bluetooth, usb and streaming services
Table of Contents

Advertisement

Brightness control

The brightness of the display can be adjusted for when the radio is in standby and for when
it is in use. If you use the unit in the bedroom, you may prefer a lower standby brightness
level than the standard setting. There are 4 Standby brightness levels and 3 levels for when
the radio is in use. To change the current brightness setting please follow these steps.
1. Apply a long press on the Info button to access the display brightness setting.
2. Choose either the High, Medium or Low brightness level. Press the Tuning control
to set the level. If the radio is playing, then the chosen brightness will be applied
immediately. If the radio is in standby, then the chosen brightness will be applied after
a 10 second delay.
3. To set the display brightness using the menu press Menu.
4. Choose 'System Settings' and then 'Brightness'.
5. To adjust the display brightness when the radio is switched on select 'Normal'.
To adjust the display brightness when the radio is in standby select 'Standby'.
Press Tuning. The current setting will be marked with an asterisk.
6. Choose either the High, Medium or Low brightness level. Press the control to set the
level. Press the Menu button to exit.
When the radio is in Standby mode, pressing a button or turning a rotary control will cause
the radio to switch to the high brightness level for a few seconds. This is so that even if
the standby brightness level is set low, it is still possible to see the time when needed.

Headphone socket

A 3.5mm Headphone Socket located on the rear of your radio is provided for use with
headphones. Inserting a plug automatically mutes the internal loudspeaker. Please be
aware that the sensitivity of headphones can vary widely. We therefore recommend setting
volume to a low level before connecting headphones to the radio. IMPORTANT: Excessive
sound pressure from earphones and headphones can cause hearing loss.
To prevent possible hearing damage, do not listen at high volume levels
for long periods.
60
DAB
Display and Audio
System Settings
Equaliser
Streaming Audio Quality
Network
Time/Date
Brightness
Inactive Standby
Brightness
On level
Standby level
Brightness
High
Medium
Low
Stream 94L
DC In:
12V
2.5A
USB:
5V
500mA
Roberts Radio Ltd, Stoney Lane,
Whiston, Prescot, L35 2XW, UK
Glen Dimplex Europe Ltd,
READ
Airport Road, Cloghran,
SAFETY GUIDE
Co. Dublin, K67 VE08,Ireland
Designed & Engineered in the UK, Made in China
DC 12V
2.5A
*
48

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5038301310462

Table of Contents