Inactive Standby Feature - Roberts Stream 207 Instruction Manual

Inactive Standby timer
The Inactive Standby timer allows your radio to save power by automatically
going to Standby if no controls are used for a period of time (or switching
off completely if using batteries). By default this period is set to 8 hours
but you may change it if you wish.
1. With your radio switched on, press the Menu button to access the
menu for the current mode.
2. Rotate the Tuning/Select control until 'System settings' is highlighted
and press the control.
3. Rotate the Tuning/Select control until 'Inactive Standby' is highlighted
and press the control.
4. Choose from 2, 4, 6, 8 hours or Off. Your radio will go into Standby
after the selected time has expired. Setting Inactive Standby to Off
will disable this feature.
Note that if the sleep timer is used (see page 82) then the sleep timer will
override this setting.
89
Main menu
DAB
FM
AUX in
Sleep
1
Alarms
System settings
System settings
Equaliser
Network
Time/Date
Backlight
2-4
Inactive Standby
Language
Timeout
Off
2 hours
4 hours
6 hours
8 hours
*