Roberts Stream 207 Instruction Manual page 13

Plugging in and language selection - cont.
6. Your radio will ask whether the Setup Wizard should be run at the next start
up. Although the 'YES' option is highlighted if you wish to change the language
you should select the 'NO' option.
Rotate the Tuning/Select control to highlight the 'NO' option. Press the Tuning/
Select control.
7. Your radio will then display the Main menu. Rotate the Tuning/Select control
until 'System settings' is highlighted on the screen.
Press the Tuning/Select control to enter the System settings menu.
8. Rotate the Tuning/Select control until 'Language' is highlighted on the screen.
Press the Tuning/Select control to enter the Language options menu.
9. Rotate the Tuning/Select control until the desired language is highlighted on
the screen.
Press the Tuning/Select control to select the chosen language option.
The display will then change to show the System settings menu in the chosen
language.
10. Rotate the Tuning/Select control until the 'Setup wizard' option is highlighted
on the screen and then press the control.
If you change the language you will not see 'Setup wizard' in English. You
will see an equivalent menu item in your language - for example, 'Assistant
réglages' in French, or 'Installaz. guidata' in Italian.
11. Rotate the Tuning/Select control until 'YES' is highlighted on the screen
and press the control to select it. This will cause the radio to run the set up
procedure as if it had just been switched on for the fi rst time, but it will do this
using the language selected in step 9, above.
12. Continue setting up your radio on the next page.
6-11
System settings
Inactive Standby
Language
Factory Reset
Software update
Setup wizard
Info
Confi guration
Setup wizard
Run wizard again
at next start up?
Main menu
DAB
FM
AUX in
Sleep
Alarms
System settings
System settings
Network
Time/Date
Backlight
Inactive Standby
Language
Factory Reset
Language
English
*
French
German
Italian
Danish
Spanish
Setup wizard
Start now?
10