Windows 'Play To' Function (Upnp Renderer) - Roberts Stream 207 Instruction Manual

Keep network connected
Your radio has the option to shut down its WiFi connection when it is in
Standby. This minimises power consumption but it does mean that you
will need to switch the radio on manually in order to use either Spotify
Connect, the 'Play to' function or any remote control software such as the
Roberts ConnectR app.
If you need to be able to remotely control the radio even when it has been
put into Standby, then you can choose to keep the network connected by
using the 'Keep network connected' option in the Network settings menu.
In the Standby mode display the WiFi signal indicator is shown with or
without a cross through it according to the state of the connection.
Network settings
View settings
Wlan region
Manual settings
NetRemote PIN Setup
Network profile
Keep network connected
51
Network settings
Keep network connected?
*

Windows 'Play to' function (UPnP renderer)

If you use Windows 7 or 8, it is possible to choose a music album, track or
playlist at the computer and then tell Windows that this should be played
on the radio using the 'Play to' function.
Using suitable software (sometimes known as a UPnP Control Point),
similar functionality is available for other computer types and for handheld
devices using Apple's iOS or Android operating systems. In this mode the
radio acts as a UPnP Renderer.
1. In order to use the 'Play to' function, the radio must be actively connected
to the network. The fi rst time that you use the 'Play to' function you
will need to allow Windows to recognise your radio. To do this, please
go to step 2.
If you have previously used 'Play to' so that Windows remembers
your radio and you have confi gured your radio to keep its network
connection in Standby mode (see 'Keep network connected', at left),
then go to step 3.
2. If your radio is not currently in use, or does not have an active connection
to your network, then you should fi rst switch on your radio and select
the Music player mode using the Mode button. Then select 'Shared
media' from the menu so that the radio establishes a connection with
Windows Media Player on your PC. After this step, all other functions
may be performed from your computer.
3. At your Windows PC, locate the fi le, album or playlist that you wish
to play on the radio.
4. Use the right-hand mouse button to pop-up a menu of options for the
chosen item and select the 'Play to' option.
5. Windows should show you one or more devices, including your radio,
to which you may choose to send the music. Highlight the radio item
and click with the left mouse button.