Display Brightness Control; Auto-Standby Feature - Bluetooth - Roberts classic blutune User Manual

Display brightness control

The brightness of the display can be adjusted and has separate settings for when
the radio is in standby or when it is in use.
1. In order to adapt the intensity of the display to suit the ambient room lighting
press and release the Dimmer button on your radio.
2. With each press of the button the display brightness will change to the next
level, allowing you to choose from High, Medium, Low and an almost-off
'night-time' setting.
3. Depending upon whether the radio is playing or in standby the radio will store
the current brightness level for that mode.
Auto-standby feature
If the radio is in Bluetooth mode, but then becomes disconnected from a paired
device for a long time (perhaps because you have gone out), the radio will enter
standby automatically in order to minimise its energy consumption.
1. The Bluetooth icon will be fl ashing because there is no current Bluetooth
connection.
2. If this condition continues for more than 10 minutes then the radio will start
a 5 minute countdown before entering standby. The radio will then display
the time remaining.
3. After a total of 15 minutes has elapsed the radio will enter standby with the
clock being displayed.
4. You will need to switch the radio on again in order to listen to the radio or to
use the Bluetooth function.
Pressing any button during the 15 minute period will reset the standby timer and
it will be cancelled if a Bluetooth connection is established.
29
1