Crestron Isys TPS-5000 Operation Manual page 29

Crestron Isys™ TPS-5000
Operations Guide - DOC. 5863A
C2Net Device, Slot 9
Setting the Net ID in Device Settings
Double-click the TPS-5000 icon to open the "Device Settings" window. This
window displays the TPS-5000 device information. If necessary, select the Net ID
tab to change the Net ID, as shown in the following figure.
"Device Settings" Window for the TPS-5000
NOTE: SIMPL Windows automatically changes Net ID values of a device added to
a program if a duplicate device or a device with the same default Net ID already
exists in the program. Always ensure that the hardware and software settings of the
Net ID match. For Net ID hardware settings details, refer to "Interface Menu" on
page 12.
TPS-5000 Symbol in Programming Manager
Programming Manager is where programmers "program" a Creston control system
by assigning signals to symbols. The following diagram shows the TPS-5000 symbol
in the SIMPL Windows' Programming Manager.
12 Inch Tilt Touchpanel: Crestron Isys™ TPS-5000 • 25
12 Inch Tilt Touchpanel