Crestron Isys TPS-5000 Operation Manual page 19

Crestron Isys™ TPS-5000
Operations Guide - DOC. 5863A
connector and refer to the information in the TPS-ENET Operations & Installation
Guide, as stated in the previous note.
Sample Display from Ethernet Button Press
RGB Menu
NOTE: The RGB button is displayed on the SETUP MENU only if the
TPS-XVGA is properly installed. Selection of the RGB button opens the RGB Menu
from which the user can adjust RGB settings.
With a TPS-XVGA installed, the TPS-5000 can display a computer-generated video
signal. The type of format must be selected carefully or the video may appear
unstable or noisy. Selecting the RGB button, located to the right on the top row of
the SETUP MENU, displays the RGB Menu, shown after this paragraph.
RGB Menu (Vertical Lines Portray RGB Sample)
The user has the option to manually select the incoming format or have the
touchpanel detect one automatically. On the rare occasion, the user may want to
choose the Manual Select button to force an incoming format. Otherwise, choose
the Auto Detect button to have the touchpanel automatically determine the format of
the input signal.
NOTE: Refer to the latest revision of the TPS-XVGA Operations & Installation
Guide (Doc. 5944) for signal format specifications.
The characteristics of the input signal are displayed centrally on the right side of the
RGB Menu. For example, in the previous illustration, the input signal has a
resolution of 1024 x 768 with a frequency of 60.9 KHz (horizontal) and 76.1 Hz
(vertical).
12 Inch Tilt Touchpanel: Crestron Isys™ TPS-5000 • 15
12 Inch Tilt Touchpanel