Crestron Isys TPS-5000 Operation Manual page 21

Crestron Isys™ TPS-5000
Operations Guide - DOC. 5863A
NOTE: If no presets are stored or the input does not closely match a stored preset,
the panel makes a 'best guess' for image settings.
Select the Return button, located at the lower right corner of the RGB Menu, after
RGB parameters have been set.
Video Menu
NOTE: The Video button is displayed on the Setup Menu only if the TPS-VID-1 is
properly installed. If the TPS-VID-2 is installed, two Video buttons labeled Video 1
and Video 2 will be displayed. Selection of a Video button opens the Video Menu
from which the user can adjust video settings.
The TPS-5000 can have up to four different composite video sources connected to
either the 6-pin connector or the BNC connectors on the TPS-IMPC when equipped
with the TPS-VID-2. However, only two composite video channels can be selected
for viewing. Refer to the latest revision of the TPS-VID-1/VID-2 Operations &
Installation Guide (Doc. 6059) for details.
Video Setup (Horizontal Lines Portray Video Sample)
Use this screen to select one of the video inputs and adjust the brightness, contrast,
saturation, and hue, if necessary. The user has the option to force the video image to
a certain mode (i.e., composite video or S-video if using the TPS-VID-1 or
TPS-VID-2 in S-video configuration) or switch modes automatically after checking
the image for colors. Use either the Composite Video or S-Video buttons to
manually control the mode. Use the Auto Detect button for automatic control. The
text color of the selected button is red rather than black.
NOTE: When configuring the TPS-VID-2, the Video 1 signal type can be
automatically detected as long as one signal is sent to the touchpanel.
NOTE: Up to four composite video feeds can be physically connected to a
touchpanel equipped with a TPS-VID-2 (two BNC feeds for unbalanced video and
two twisted-pair feeds for balanced video). Any combination of balanced and
unbalanced video connections are allowed. However, only two composite video
channels can be selected for viewing. Specify the connections to use by selecting the
12 Inch Tilt Touchpanel: Crestron Isys™ TPS-5000 • 17
12 Inch Tilt Touchpanel