Installation - Agilent Technologies 5800 User Manual

Installation

3 Installation
Agilent ICP-OES Instrument Overview
Instrument Status LED Color Coding
Front Power On/Off Button
ICP Expert Software
Connecting ICP Expert software to the ICP-OES
Performing a Detector and Wavelength Calibration
Hardware Components Replacement
Torch Assembly and Disassembly
Accessories
The Agilent ICP-OES must be installed by an Agilent-trained, Agilent-qualified or
Agilent-authorized field service engineer.
You should have completed and returned the form in the Site Preparation Guide
stating that you have prepared the laboratory in accordance with the requirements
detailed in that manual. An Agilent representative will then arrange a suitable
installation date with you.
Details for unpacking the instrument and what to do in case it has been damaged
in transit are also outlined in the Site Preparation Guide.
Agilent 5800 and 5900 ICP-OES User's Guide
20
22
22
23
24
24
25
27
35
19