Agilent Technologies 5800 User Manual page 30

Installation
3
4
5
30
Gently slide the quartz tube-set into the torch body, avoiding contact with the
injector.
Figure 6. Torch inserted into torch body
Position the quartz tube-set so that the groove on the torch body aligns with
the "T" alignment mark on the quartz tube-set as shown in Figure 7.
Figure 7. The alignment mark on the quartz outer tube-set should be aligned with the groove on
the torch body
Press the quartz outer tube-set fully into the torch body and then press down
on the top seal to secure the tube-set in place. See Figure 8.
Agilent 5800 and 5900 ICP-OES User's Guide