Bosch DCN Next Generation Installation And User Instructions Manual page 92

DCN NG | Installation and User Instructions | Section 3 | Central Control Equipment
10.6.11 Set the unit name
Each analogue audio expander can be assigned a name
via the Unit Name menu item. The default name is
Analog Expander. The unit name may contain up to 16
ASCII characters.
10.6.12 Reset to factory default values
Use the Defaults menu item to reset all options to the
factory defaults. However, the unit name is not reset.
table 10. 1 5: Defaults submenu (* = default)
Menu item
4E Defaults ...
4E Defaults ...
Bosch Security Systems | 2004-03 | 9922 141 70521en
Options
Reset to defaults?
- No*
- Yes
Descriptions
Push the button to go to the submenu.
Cancel reset.
Reset all options to the factory default
values. The user defined name is not reset.
en | 92