About This Manual; Purpose; Intended Audience; Hyperlinks - Bosch DCN Next Generation Installation And User Instructions Manual

DCN NG | Installation and User Instructions | Section 1 | Introduction
1

About this manual

1. 1

Purpose

The purpose of the Installation and User Instructions is
to provide information required to install and operate
the Digital Congress Network Next Generation
(DCN NG).
1.2

Intended audience

This manual is primarily intended for installers who are
responsible for the installation and configuration of a
DCN NG system. Besides information required to
install the system, this manual also contains operating
instructions. These are intended for the users of the
system.
1.3

Hyperlinks

The Installation and User Instructions are also available
as a digital document in the Adobe Portable Document
Format (PDF). All references to pages, figures, tables,
etc. in this digital document contain hyperlinks to the
referenced location.
1.4

Related documentation

The following related documents are available:
• LBB4190/00 DCN Start-up Software User Manual
(9922 141 7051xen).
• LBB4187/00 Open Interface Software User Manual
(9922 7048xen)
• LBB4185/00 System Installation Software User
Manual (9934 141 7046xen).
• LBB4172/00 Simultaneous Interpretation Software
User Manual (9925 141 7036xen).
Bosch Security Systems | 2004-03 | 9922 141 70521en
1.5

Alerts

In this manual, four types of alerts are used. The alert
type is closely related to the effect that may be caused
when it is not observed. These alerts - from least severe
effect to most severe effect - are:
• Note
Alert containing additional information. Usually, not
observing a note alert does not result in damage to
the equipment or personal injuries.
• Caution
The equipment can be damaged if the alert is not
being observed.
• Warning
Persons can be (severely) injured or the equipment
can be seriously damaged if the alert is not being
observed.
• Danger
Not observing the alert can result in death.
en | 11