Bosch DCN Next Generation Installation And User Instructions Manual page 72

DCN NG | Installation and User Instructions | Section 3 | Central Control Equipment
8.6.5 Set monitoring options
The Monitoring submenu is used to set which signal is
sent to the monitoring headphones output. It can be one
of the audio inputs, audio outputs or the floor.
Furthermore, the submenu provides level meters for a
visual identification of the actual signal strength.
table 8.8: Source/volume submenu (* = default)
Menu item
1A Source/Volume
8.6.6 View version information
The Serial Number, HW Version, SW Version A and
SW Version B menu items are used to obtain version
information about the CCU. This information must be
mentioned in service requests or failure reports.
table 8.9: Enquiry submenu
Menu item
2A Serial number
2B HW Version
2C SW Version A
2D SW Version B
Bosch Security Systems | 2004-03 | 9922 141 70521en
Option Value 1
Source:
- Floor
- Input nn Input nr:
1, 2
- Output nn Output nr:
1, 2
Description
Shows the hexadecimal serial number.
Shows the hardware version.
Shows the version number of the application software.
Shows the version number of the network software.
Value 2 Description
Volume: The signal from the
-31 to 0 dB floor is available on
(-16 dB*) the monitoring
headphones output.
Volume: The signal from
-31 to 0 dB audio input nn is
(-16 dB*) available on the
monitoring
headphones output.
Volume: The signal from
-31 to 0 dB audio output nn is
(-16 dB*) available on the
monitoring
headphones output.
en | 72