ISHIDA IP-EMZ Manual page 92

Chapter 4 PROGRAMMING MODE
4.11.9 COPYING ORIGINAL TEXT TO DESIGNATED FIELD
The following procedure is used to copy the original text to the text field of the designated file.
EXAMPLE
Copy the text "Roast Fillet Steak" of the PLU No.5 to the PLU No.25.
page 4-40
1
. Confirm that the INPUT field is
selected (yellow).
If not, touch the INPUT field first
to declare that the numeric entry
will be made.
Then, enter the desired PLU
number and press the PLU key
on the operating console to
designate the PLU file to which
the original text is copied.
2
. Enter the original PLU number
using the numeric keys, and
touch [COPY] on the screen.
3
. The copy confirmation screen
appears on the display.
Then, touch [EXECUTE] to copy
the original text to the text field of
the designated file.
IP-EMZ Operation Manual