Chapter 2 NORMAL MODE
2.6 MANUAL LABELING
This section explains about how to change auto labeling to manual labeling for the selected PLU data.
Lightly press the touch
panel with your finger.
Pressing the panel
using pointed objects
such as fingernails or
mechanical pencils
may damage the touch
panel.
[AUTO LABELING] is
usually displayed.
page 2-12
1
. Make sure that the desired PLU
screen is displayed.
2
. Press the [ ] button to display the
function key screen.
3
. Press the [AUTO] button to
change the button display to
[MANUAL].
The button display will change
between [AUTO] and [MANUAL]
each time the button is pressed.
5
. Press the [FEED] stroke key to
issue the label.
IP-EMZ Operation Manual
Need help?
Do you have a question about the IP-EMZ and is the answer not in the manual?