ISHIDA IP-EMZ Manual page 85

4.11.3 TEXT EDITING EXAMPLE
Text editing procedure is explained by quoting the following PLU name edit screen as an example.
To erase the entire text
displayed on the text
display field, touch
[ERASE] on the
screen.
IP-EMZ Operation Manual
1.
Confirm that the text edit screen
is displayed.
Then, enter the desired PLU
number and press the PLU key
on the operating console.
Example PLU No.5
2.
Text edit screen for the PLU
number "5" is called.
Enter the desired characters.
Example "Roast Fillet Steak"
Edit the text as necessary.
3.
When the text editing is
completed, touch [FIX] to confirm
the edited text image on the text
display field.
Then, touch [RETURN] to finish
the text editing.
Chapter 4 PROGRAMMING MODE
page 4-33