Q'STRAINT INQLINE SECUREMENT Use And Care Manual page 21

PROBLEM
The webbing is twisted inside
the front retractor.
The webbing is twisted inside
the back retractor.
The Front Retractors locked
down before wheelchair was
secured.
When Unlock Button was
pressed the Front Retractors did
not release.
The wheelchair stopped
midway up or down the
ramp because the Front
Retractors are no longer
working.
TROUBLESHOOTING
IMAGE
Blinking Red Lights
Blinking Green Lights
21
ANSWER
Press and hold both buttons for about 4
seconds to release front retractors. Then pull
J-Hook until you find twisted webbing and
straighten the webbing.
Press lever and pull J-Hook until you find
twisted webbing and straighten the webbing.
Press and hold both buttons for about 4
seconds to release front retractors and then
continue.
Press Reset Button (2 blinking red lights
and 2 solid green lights), push downward
the Thumb Controller until wheelchair
moves back a couple of inches, stop and
continue process.
Press the Reset Button and continue.