Q'STRAINT QLK-150 Quick Start Manual

Hide thumbs Also See for QLK-150:

Download this manual

SECURING WHEELCHAIR

1. Vehicle must be off.

2. All lights on the Dash Control must be off.

Unlock the QLK if the

green light is on.

3. Enter the QLK, green light

comes on to indicate

wheelchair is secured in QLK.

4. Buckle seatbelts and lock or power off chair.

5. Ready to go.

Watch QLK Video, Scan QR Code:

or Follow Web-Link: youtu.be/izUFVliQ6Fc

WARNINGS

Do not operate the vehicle if the warning buzzer is beeping, or the red light is

lit up on the Dash Control Panel. Users MUST never attempt to repair, adjust

or modify any components of the QLK-150 system and/or seatbelts.

This is a quick guide. Make sure to read, understand and follow all the

instructions and warnings in the Use and Care Manual.

Need help?

Do you have a question about the QLK-150 and is the answer not in the manual?

Page 1 Do not operate the vehicle if the warning buzzer is beeping, or the red light is lit up on the Dash Control Panel. Users MUST never attempt to repair, adjust or modify any components of the QLK-150 system and/or seatbelts. This is a quick guide. Make sure to read, understand and follow all the...
Page 2 RELEASING WHEELCHAIR 1. Turn vehicle off. 2. Unbuckle seatbelts and unlock or power on chair. 3. Unlock the QLK. When the QLK unlocks, the red light comes on for 10 seconds. If the wheelchair does not exit the QLK within 10 seconds, the system locks the wheelchair within the QLK and the green light...