Q'STRAINT QLK-150 Quick Start Manual

REVERSE COUNTERSINK DRILL BIT
• Read All Instructions Prior to Use.
• This product MUST be used and serviced by an experienced and trained technician.
• Do not alter, repair, adjust or modify this product in any way and do not interchange or substitute any components.
• Any deviation from these recommendations is the responsibility of the installer.
Broken and worn components MUST be replaced.
•
Countersink bit
These instructions contain the most current information at the time of printing. Q'STRAINT® reserves the right to modify systems, components and content without notice.
Q'STRAINT® and Q'STRAINT® logo are registered trademarks of Q'STRAINT®, Inc. QLK is a trademark of Q'STRAINT®, Inc.
Products mentioned herein are for identification purposes only and may be registered trademarks, trademarks and patents of their respective companies. All other brand names,
FOR TECHNICAL SUPPORT OR TO FIND YOUR NEAREST AUTHORIZED DEALER:
Q'STRAINT EUROPE
72-76 John Wilson Business Park
Whitstable, Kent, CT5 3QT
United Kingdom
Tel: +44 (0)1227 773035
Fax: +44 (0)1227 770035
Email: info@qstraint.co.uk
WHEELCHAIR DOCKING SYSTEM
IMPORTANT SAFEGUARDS AND WARNINGS
www.qstraint.com
© 2019 Q'STRAINT®. All Rights Reserved.
trademarks, registered trademarks and patents are the property of their respective owners.
Oakland Park, FL 33334
Email: qstraint@qstraint.com
Shaft
Q'STRAINT AMERICA
4031 NE 12th Terrace
Tel: 800-987-9987
Fax: 954-986-0021
Q'STRAINT AUSTRALIA
Tramanco Pty Ltd.
21 Shoebury Street,
Rocklea, Australia, QLD. 4106
Tel: +61 7 3892 2311
Fax: +61 7 3892 1819
Email: info@tramanco.com.au
QC17069 rev A