GE Consumer & Industrial
Multilin
DGT Distributed Generation Trip
Control System
Chapter 4: Software
EnerVista DGT-DG Setup Software
Installing the EnerVista "DGT-DG" Setup software
DGT DISTRIBUTED GENERATION TRIP CONTROL SYSTEM – INSTRUCTION MANUAL
Software
After ensuring the above minimum requirements, use the following procedure to install the
EnerVista DGT-DG Setup software from the enclosed GE EnerVista CD or the EnerVista
website.
1.
Insert the GE EnerVista CD into your CD-ROM drive.
2.
Click the Install Now button and follow the installation instructions to install the no-
charge EnerVista software on your local PC.
3.
When installation is complete, start the EnerVista Launchpad application.
4.
Click the IED Setup section of the Launch Pad toolbar.
4–25