Table of Contents
Advertisement
CHAPTER 4: SOFTWARE
DGT DISTRIBUTED GENERATION TRIP CONTROL SYSTEM – INSTRUCTION MANUAL
Press the Yes button and the uploading will begin. This process normally takes 20-30
seconds. After it's done, and if the Settings File has been successfully accepted by the
device, you will get another message:
Information in the Online window will be updated accordingly.
Otherwise you will get an error message:
10. The other way to upload to the device is to do this directly, without using an
intermediate Settings File. In the Offline window you can select the desired device's
node, then select the Send to Online Device command from the context menu (right
mouse click):
11. There are some extra features in the Online Window that you may find quite useful
when dealing with the DGT devices:
•
Diagnostic – gets current settings from the device. These settings can be stored in a
text file and, in case of necessary, sent later to the technical support team.
•
Status – gets the synchronization status of the device.
•
Logout – forces system to logout.
12. If you double-click upon the Diagnostics node in the Online window, the next window
will appear:
ENERVISTA DGT-UTILITY SETUP SOFTWARE
4–45
Advertisement
Table of Contents
