Safety Instructions - HBM T40B Mounting Instructions

Safety instructions

1 Safety instructions
FCC Compliance & Advisory Statement for Option 7, Code U
Important
Any changes or modification not expressly approved in writing by by the party
responsible for compliance could void the user's authority to operate the
device. Where specified additional components or accessories elsewhere
defined to be used with the installation of the product, they must be used in
order to ensure compliance with FCC regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer­
ence that may cause undesired operation.
The FCC identifier or the unique identifier, as appropriate, must be displayed
on the device.
Model Measuring range
T40S2 50 Nm, 100 Nm, 200 Nm
T40S3 500 Nm, 1 kNm
T40S4 2 kNm, 3 kNm
T40S5 5 kNm
T40S6 10 kNm
4
FCC ID
2ADAT−T40S2TOS6
A03452_15_X00_00 HBM: public
IC
12438A−T40S2TOS6
T40B