Installing The Stator - HBM T40B Mounting Instructions

Important
Dry screw connections can result in different and higher friction factors (see
VDI 2230, for example). This means a change to the required tightening
moments. The required tightening moments can also change if you use screws
with a surface or property class other than that specified in Tab. 5.1, as this
affects the friction factor.
5.6

Installing the stator

On delivery, the stator has already been installed and is ready for operation.
The upper antenna segment can be separated from the stator, for example, for
maintenance or to facilitate stator mounting.
Antenna segment
screws with washers
Fig. 5.2 Bolted connection of the antenna segments on the stator
T40B
(M5)
Fan‐type
A03452_15_X00_00 HBM: public
lock
washers
Stator housing
Mechanical installation
Hole for fixing the antenna
segment, diameter 4.2 or
5.2 mm, depending on
maximum capacity
top
Antenna segments
bottom
23