Markings Used; Symbols On The Transducer - HBM T40B Mounting Instructions

Markings used

2 Markings used
2.1

Symbols on the transducer

Read and note the data in this manual
CE mark
Label example
Model: T40S2
FCC ID: 2ADAT-T40S2TOS6
IC: 12438A­T40S2TOS6
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer­
ence received, including interference
that may cause undesired operation.
10
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the rele­
vant EC directives (the Declaration of Conformity can be
found on the HBM website at
HBMdoc).
Label example with FCC ID and IC number. Location of
the label on the stator device.
A03452_15_X00_00 HBM: public
www.hbm.com under
T40B