Rotational Speed Measuring System, Reference Signal (Optional) - HBM T40B Mounting Instructions

5.7 Rotational speed measuring system, reference signal
(optional)
The optional rotational speed measuring system (also with the additional refer­
ence signal and zero index option) is integrated into the transducer at the fac­
tory, so no installation is required.
Fig. 5.8 Torque transducer with rotational speed measurement and reference signal
Information
The sensor head is identified appropriately to distinguish the number of pulses
(1024 or 128) the stator returns to the rotational speed output (plug 2).
Fig. 5.9 Label for 128 or 1024 pulses on the sensor head
T40B
A03452_15_X00_00 HBM: public
Mechanical installation
Magnetic ring for
rotational speed
measurement
Sensor head for the
reference signal
Sensor head for
measuring rotational
speed
29