Mechanical installation
5.4
Installation options
There are basically two options for mounting the torque flange: with or without
dismantling the antenna ring. We recommend mounting as described in Chap
ter 5.4.1. If mounting in accordance with Chapter 5.4.1 is not possible, (e.g. in
the case of subsequent stator replacement), you will have to dismantle the
antenna ring. It is essential in this case to comply with the notes on assembling
the antenna segments (see Chapter 5.4.2).
5.4.1
Installation without dismantling the antenna ring
1. Install rotor
3. Finish shaft train installation
18
Mounting supplied
by customer
2. Install stator
Support supplied
by customer
4. Fit support
A03452_15_X00_00 HBM: public
T40B