i
15.9 End points
You can use the DuoFern Manual Control to set the end points of a con-
nected RADEMACHER electronic tubular motor.
i
Centre position
We recommend that you initially move the roller shutter to the centre
position in order to ensure the correct setting of the end points.
1.
2.
The end point function is only available for RADEMACHER
electronic tubular motors from 2000 onwards.
The end points cannot be set with the DuoFern Manual
Control for tubular motors connected in parallel.
Open the "Centre position" menu.
Use the up / down buttons to move the
roller shutter to the centre position and press
the OK / stop button to stop the motor.
For more, see next page.
EN
97