Wind Automation - RADEMACHER DuoFern Instruction Manual

i

15.3.2 Wind automation

In the case of DuoFern end units with support for wind automatic func-
tion, the roller shutter moves in the set direction when the previously
set wind threshold value is reached (see page 95).
i
1.
2.
3.
90
A wind sensor, such as the DuoFern Environmental Sensor
or DuoFern Sun/Wind Sensor, must be available to use the
wind function.
Activating the automatic wind function, as
described on page 88, enables access to
further setting options with the
In the "Wind automation" submenu, the state
of the wind automatic function and the set
"movement direction" are displayed.
Select "Movement direction" and open
using the OK button.
Select and confirm the desired setting.
EN
key.