Software Update For The Manual Control - RADEMACHER DuoFern Instruction Manual

i

19. Software update for the manual control

Please regularly check for the latest software version.
You can find the maintenance tool with the current software version
in the service area of the RADEMACHER website at www.rademacher.de.
1.
Start the application after the download and follow the instructions on
the screen.
2.
Connect the DuoFern Manual Control to the PC via the USB port.
i
3.
The DuoFern Manual Control found is displayed. Click on it. Three
options are displayed:
◆ Creating a backup
Here you can define the file name and then save the backup.
◆ Firmware update
First, a backup is created and then the firmware update starts
automatically.
◆ Restoring the backup
Select and restore an existing backup file.
114
Use only a USB data cable with a maximum length of 1.5 m
to connect the DuoFern Manual Control.
The DuoFern Manual Control must not be disconnected
from the PC during the entire process.
EN