Motor Run Time; Change Of Rotation Direction / Mode; Run Time - RADEMACHER DuoFern Instruction Manual

i

15.6 Motor run time

The run time setting is used so that you can specifically move to certain
percentage positions (e.g. sunshine position or ventilation position).
i

15.7 Change of rotation direction / mode

If required, this function can be used to change the rotation direction or
mode of a connected DuoFern device (e.g. a radio tubular motor).
Reversal of rotation direction
It is not necessary to re-wire the motor if the rotation direction of the
connected motor is wrong (
and
of the motor can be easily changed using the "Reversal of rotation
direction" function.
Mode change
A mode change alters the action executed by a device at an up or down
command.
For example, if a device is switched on at an up command, this action is
inverted by the mode change.
i
94
Read the information provided in the operating manual of
the device used.
moves the roller shutter upwards). The rotation direction
On and off commands remain unaffected by this.
moves the roller shutter downwards
EN