Intermediate Position - RADEMACHER DuoFern Instruction Manual

i

15.5 Intermediate position

i
This function can be used to set intermediate values, setting the device
to the intermediate value when it is next switched on.
1.
i
2.
3.
Reset after a stop command
The activation of this function means that the new position is adopted
as the intermediate position if there is a stop command.
This function is only active if a dimmer has previously been
selected as a device.
Select the desired function
using the multidirectional toggle switch.
The subsequent setting of the intermediate position is only
possible when the intermediate function is activated.
Open the pop-up window for the intermediate
position.
You can move to the desired intermediate
position by pressing and holding the
up / down button.
The position reached is displayed after
releasing the up / down button. This can be
accepted with the OK button or re-adjusted
with the up / down button.
EN
93