i
17.2 Logging off devices
Removing devices manually
This function can be used to remove devices from the DuoFern Manual
Control without having to start log-off mode on the DuoFern device.
1.
2.
2.1
2.2
or
2.3
108
A list of the devices logged on
to the DuoFern Manual Control is displayed
by pressing the OK button.
Select the device to be removed using the
multidirectional toggle switch and OK button.
Then a message is displayed.
Acknowledge the information by pressing the
OK button. This removes the device manually
from the DuoFern Manual Control.
Exit the dialogue using the back button
without removing the device.
Then the list of devices is displayed
again.
EN