Remote Log-On/Off; Remote Log-On / Off; Factory Settings; Software Version - RADEMACHER DuoFern Instruction Manual

i

15.10 Remote log-on/off

This function can be used to switch DuoFern devices to log-on or log-off
mode without even having to press a button for the respective mode on
the device. For example, the DuoFern environment sensor can easily be
connected to the individual DuoFern end units via radio.
1.
2.
2 minutes
i

15.11 Factory settings

This function can be used to reset the selected DuoFern device to the
default factory settings without removing the DuoFern devices logged
on to this device.
After selecting the "Reset" option, a message appears stating that you
can execute a software reset by pressing the OK button or exit the func-
tion by pressing the back button.
i

15.12 Software version

The software version of the currently selected device is displayed in this
menu.
Select the desired mode
(log-on / log-off ).
The respective command is sent to
and confirmed by the DuoFern device by
pressing the OK button.
The devices are then in the
selected mode for 2 minutes.
This can be prematurely terminated with
the "Stop" function.
EN
99