Moving To A Target Position - RADEMACHER RolloTron Comfort DuoFern Translation Of The Original Operating And Assembly Manual

+ -

14.1 Moving to a target position

If necessary, you can enter an arbitrary target position for
your roller shutters which you can then move to directly.
The RolloTron Comfort DuoFern is able to move to the tar-
get position and stop the roller shutters fully independently
and automatically. It is not necessary to give an additional
manual movement or stop command.
Target position
The target position is entered as a percentage and can be
selected in 10% steps using the plus / minus buttons.
0 % = the roller shutters are fully opened.
100 % = the roller shutters are fully closed.
Automatic movement to a target position after
approx. two seconds.
The system will initiate movement to the configured
target position automatically if no button is pressed for
approx. two seconds.
i
The ventilation position is ignored when moving to the
target position.
1.
Display the current position
of the roller shutters.
a) In order to do so, briefly
press the plus or the
minus button.
b) The current position of
the roller shutters is dis-
played as a percentage.
2.
Enter the desired target
position by repeatedly
pressing the button (e.g.
50%).
3.
The RolloTron will automa-
tically move to the target
position and stop after ap-
prox. two seconds.
EN
+ -
+ -
33