Table of Contents
Advertisement
• Function "AF Start" available in the settings for foot/hand
switches
In the default setting, the autofocus function is activated and
automatic focussing is initiated each time when the brake is
activated (Brake starts AF).
10.4 Working with the GLOW
Autofocus system
To operate the Leica OH6, Leica OHX or ARveo control unit,
read the user manuals of the corresponding surgical
microscope systems.
The GLOW Autofocus system is controlled via the control unit of the
Leica OH6, Leica OHX or ARveo. You can configure the following
settings via the control unit:
• Activate/deactivate the Autofocus
• Activate/deactivate the parfocality function for diopter setting
• Change the size of the autofocus window
• Change the position of the autofocus window
• Assign a button on the footswitch/handswitch for starting the
Autofocus
• Save the individual autofocus settings of the operating doctor
In the default setting after installation, the autofocus
function is started each time the brakes are activated.
10.4.1 Activating/deactivating the GLOW
Via the Main menu
The Autofocus system is active, when the "Autofocus" button is
highlighted in green.
Deactivating the GLOW Autofocus system
Click the green "Autofocus" button.
X
X
A message is displayed and in the following the "Autofocus"
button will be gray.
Activating the GLOW Autofocus system
Click the gray "Autofocus" button.
X
X
A prompt is displayed if you really want to activate the
autofocus system.
Press "Confirm" to activate the autofocus system.
X
X
GLOW800 / Ref. 10 747 241 / Version 04
Autofocus system
GLOW Autofocus (optional)
1
29
Advertisement
Table of Contents
