Main Screen; Settings In The Technician Menu - BWT AQA therm MOVE Power Installation And Operating Manual

8 .2 .2 Main screen

The information on the main screen is divided
into four rows:
Con- Water temper-
ductivi- ature (°C)
ty value
for the
outlet
water
(μS)
Switch-off
point for pres-
sure produc-
tion (bar)
Inlet water
counter
(litres)
Outlet water
counter ( litres)
If the set counter levels for
are exceeded, the respective v alue
OUTLET WATER
is displayed in red.

8 .2 .3 Settings in the technician menu

To access the "
f TECHNICIAN MENU"
press the button on the left of the screen.
To change settings for the product in
the technician menu, you must first en-
ter the password "05310" and confirm.
This prevents any unintentional chan-
ges to the limit values.
To confirm an entry, you must press
tone confirms the switch to the next level.
Service days (days)
Pump pressure
(bar)
Pump operating
hours (hours)
Current outlet water
production (litres
per hour)
, and
DAYS INLET WATER
view,
. A signal
SAVE
45
EN