Download Print this page
BWT AQA drink Pure Slim DUO Installation And Operating Instructions

BWT AQA drink Pure Slim DUO Installation And Operating Instructions

Drinking water filter kit

Advertisement

Quick Links

AQA drink Pure Slim DUO & TRIO Drinking
Water Filter Kit Installation and
Operating Instructions
Specifications:
Pressure Range: 30 – 72 psi (2.1 – 5.0 bar)
Temperature Range: 40 – 77°F (5 – 25°C)
Rated Service Flow: 2.0 Lpm
Average Filter Capacity: 300 Litres or 6 months
(Filtered water capacity is dependent on source water quality)
Parts Included:
Filter Head, Duo or Triple with push-fit
connections
Two or three filters depending on model
Rear mounting plate
Self cutting Valve with tube attached
Drinking water tap
6mm (1/4") plastic tubing
Tools required:
Phillips Screwdriver
Towel
Drill
File or Sandpaper
Pencil
Precautions:
WARNING:
certified for cyst reduction may be used on disinfected waters that
may contain
CAUTION: This filter must be protected from freezing, which can
cause cracking of the filter and water
leakage.
CAUTION: Because of the product's limited service life and to
prevent costly repairs or possible water damage, we strongly
recommend that the head of the filter be replaced every ten years.
If the head of your filter has been in use for longer than this period,
it should be replaced immediately Date the top of any new head to
indicate the next recommended replacement date.
or after the system. Systems
Customer Help Line: 01494 838 100
Monday to Thursday: 09.00 - 17:30 - Friday: 09:00 - 17:00
CAUTION: Turn off water supply to filter if it will be left unattended
for an extended period of time.
For cold water use only.
Make certain that installation complies with all local bylaws and
regulations.
The contaminants or other substances removed or reduced by
the selected cartridge are not necessarily in your water. Ask
your local water supplier for a copy of their water
analysis.
After prolonged periods of non-use (such as during a
holiday) it is recommended that the system be flushed
thoroughly. Let water run for 2-3 minutes before using.
The filter cartridges used with this system have a limited service
life. Changes in taste, odour, colour; and/or flow of the water
being filtered indicate that the cartridge should be replaced.
Installations:
For standard installation on 15 mm copper cold
water pipe.
Please read all instructions and precautions
before installing and using your under-sink
drinking water system.
Numbered diagrams correspond with numbered steps.

Advertisement

loading

Summary of Contents for BWT AQA drink Pure Slim DUO

  • Page 1 AQA drink Pure Slim DUO & TRIO Drinking Water Filter Kit Installation and Operating Instructions Specifications: Pressure Range: 30 – 72 psi (2.1 – 5.0 bar) Temperature Range: 40 – 77°F (5 – 25°C) Rated Service Flow: 2.0 Lpm Average Filter Capacity: 300 Litres or 6 months...
  • Page 2 Fig 1 1. Selecting the Tap Location NOTE: The drinking water tap should be positioned with function, convenience and appearance in mind. An adequate flat area is required to allow tap base to rest securely whether fitted directly to your sink or an adjacent worktop. 2.
  • Page 3 Fig 11 DUO Pack Contains: 1 X Slim C-101 High Efficiency Activated Carbon Filter 1 X Slim Mg-103 BWT Mg+ Filter TRIO Pack Contains: 1 X Slim C-101 High Efficiency Activated Carbon Filter 1 X Slim Mg-103 BWT Mg+ Filter...
  • Page 4 If your problem persists, please call our technical team during office hours on 01494 838 100 Europe’s No.1 in Water technology CONTACT BWT 2020. In the interests of product development, we reserve the right to alter specifications without prior notice. All photographs and dimensions are given for guidance only. Terms and conditions apply. E&OE.

This manual is also suitable for:

Aqa drink pure slim trio