Restoring To Defaults (All Reset) - Yaesu FTM-6000R Operating Manual

Restoring to Defaults (All Reset)

When the All Reset function is performed, all data registered in the memory will be deleted. Be
sure to keep a separate record of the information registered to the memory channels.
To restore all transceiver settings and memory content to the factory defaults.
The all reset can be canceled by pressing the PTT switch during the operation.
1. Turn the transceiver OFF.
2. Simultaneously, press and hold the [BAND grp], [V/M mw] and the [PMG pw] keys,
and turn the transceiver ON.
"ALL.RST" appears on the LCD.
3. Press the DIAL knob.
"ALL.RST" appears on the LCD.
4. Press the DIAL knob again.
The display indicates "RST.ING", then changes to "RST.CMP" when all resets are
complete.
38
Caution