Restoring To Defaults (Reset); All Reset; Set Mode Reset - Yaesu FT3DR Operating Manual

When the All Reset function is performed, all data registered in the memory will be deleted. Be
sure to note the settings on paper or back up the data on a microSD memory card. For details on
how to save backup onto a microSD memory card.

All Reset

To restore all transceiver settings and memory content to the factory defaults.
1. Turn the transceiver OFF.
2. Press and hold the [BACK] key, the [DISP] key and the [BAND] key and turn the
transceiver ON simultaneously.
The beep sounds and the confirmation screen is displayed.
3. Touch [OK].
• The beep will sound, and the transceiver will reset all factory defaults.
• After resetting all defaults, the call sign input message appears on the LCD. Set
the call sign.
• To cancel the resetting, touch [CANCEL].

Set Mode Reset

All the Set mode only, settings can be restored to the default settings.
1. Turn the transceiver OFF.
2. Press and hold the [BACK] key and the [DISP] key and turn the transceiver ON
simultaneously.
The beep sounds and the confirmation screen is displayed.
3. Touch [OK].
• The beep will sound, and the transceiver will reset all Set mode settings are reset
to defaults.
• To cancel the resetting, touch [CANCEL].

Restoring to Defaults (Reset)

Caution
41