Dual Receive (D.rcv) Function; Registering The Priority Channel - Yaesu FT3DR Advanced Manual

Dual Receive (D.RCV) Function

The transceiver is equipped with the following 3 types of Dual Receive Functions:
• VFO Dual Receive
• Memory Channel Dual Receive
• Home Channel Dual Receive
The transceiver checks for signals on the frequency registered to the selected memory
channel (Priority Memory Channel) once approximately every 5 seconds. When receiv-
ing a signal on the frequency registered to a priority memory channel, the Dual Receive
function automatically pauses, and allows reception of the signals.
Example: Checking the priority memory channel "100" (145.000 MHz), while receiving
"432.500 MHz".
VFO

Registering the priority channel

1. Register the preferred receive frequency and communication mode to the priority
memory channel (see the operating manual).
2. Press the [V/M] key to recall the memory channel.
3. Touch and hold [F MW], and then rotate the DIAL knob
to select the memory channel registered in step 1.
4. Touch [PRI.CH].
• The priority memory channel setting is saved and op-
eration returns to the prior recalled memory channel.
• When recalling the priority memory channel, the " "
icon appears on the upper right side of the memory
channel number.
The transceiver monitors signals
on the frequency registered to the
Priority Memory Channel, once
approximately every 5 seconds.
The transceiver returns to
the previous frequency
quickly and continues to
receive mode when there
is no signal.
24
Priority
Memory Channel
When the transceiver receives
a signal on the frequency registered
to the priority memory channel, dual
reception stops and signal receiver
switches to priority memory channel.