Dual Receive Function; Priority Scan; A-B Dual Receive - Yaesu FTM-200DR Operating Manual

C4fm/fm 144/430mhz dual band transceiver
Hide thumbs Also See for FTM-200DR:
Table of Contents

Advertisement

Dual Receive Function

The transceiver is equipped with the following 2 types of Dual Receive Functions:
z Home Channel Priority Scan
z A-B Dual Receive: The Operation Band and Sub Band are checked
alternately at high speed

Priority Scan

While receiving on the VFO or Memory Chanel, the transceiver checks for signals on the
HOME channel once every 5 seconds. When a signal is received on the HOME channel,
the priority scan pauses, allowing reception of the signal. When there is no signal on the
HOME channel for about 5 seconds, the transceiver will resume Priority Scan.
z Activating Priority Scan
1. Press and hold the [F menu] key.
2. Rotate the DIAL knob to select [50 DUAL RCV MODE], then press the DIAL knob.
3. Rotate the DIAL knob to select [PRIOITY SCAN], then press the DIAL knob.
4. Press any key (except Power Switch) or PTT switch to finish the setting and return to
the original screen.
z Disable the Priority Scan function
1. To cancel Priority Scan, just repeat the above procedures, selecting "OFF" in step 3
above.

A-B Dual Receive

Check if there is a signal that alternates between the operation band and the sub band at
high speed. If there is a signal in either band, it will stop instantly and continue receiving,
so simultaneous reception is not possible, but you can stand by in two bands. As soon
as there is no signal, it returns to the original frequency and resumes A-B Dual Receive.
58
T h e t r a n s c e i v e r m o n i t o r s
s i g n a l s o n t h e f r e q u e n c y
registered to the Priority HOME
VFO
Channel, once approximately
every 5 seconds.
The transceiver returns to the
previous frequency quickly
and continues to receive
m o d e w h e n t h e r e i s n o
signal.
Priority Channel
(HOME Channel)
When the transceiver receives a
signal on the frequency registered to
the priority memory channel, dual
reception stops and signal receiver
switches to priority memory channel.
Check for signal presence
while switching at high speed

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftm-200de

Table of Contents