Installing/Removing Power Modules - Siemens RUGGEDCOM RSG2488 Installation Manual

Modules
4.3 Installing/Removing Power Modules
4.
5.
6.
7.
4.3

Installing/Removing Power Modules

The RUGGEDCOM RSG2488 supports dual redundant power supply modules.
1
2
Figure 4.4
Contamination hazard – risk of equipment damage
28
Insert the new module into the slot.
1
2
Module
1
Chassis
2
Screw
3
Figure 4.3 Installing a Module
Tighten the screws to secure the module.
[Optional] If necessary, install the device in the rack.
Connect power to the device.
1
Power Supply Module (PS1)
Power Supply Module (PS2)
Power Supply Modules
NOTICE
3
2
RUGGEDCOM RSG2488
Installation Manual, 07/2021, C79000-G8976-1048-11