Installing/Removing Power Modules - Siemens RUGGEDCOM RX1501 Installation Manual

Modules
4.4 Installing/Removing Power Modules
4.4

Installing/Removing Power Modules

The RUGGEDCOM RX1501 supports a single power module.
1
Figure 4.4
NOTICE
Contamination hazard – risk of equipment damage
Prevent the ingress of water, dirts and other debris that may lead to premature
equipment failure. Always make sure slots are not left empty.
Removing a Power Module
To remove a power module, do the following:
DANGER
Electrocution hazard – risk of serious personal injury or death
Make sure power to the module is turned off before servicing the power supply ter-
minal.
1. Turn off power to the module.
42
All manuals and user guides at all-guides.com
1
Power Module
Power Module
RUGGEDCOM RX1501
Installation Manual, 05/2020, C79000-G8976-1054-17