uAvionix AV-30-E Service Manual page 23

1. Ensure the aircraft is completely motionless and on the ground during
the next several steps.
2. In the Installation Menu, rotate the center knob until "GYRO CAL" is
displayed. Push the center button to enter calibration mode. Confirm
by pushing the right button.
3. "Calibration in progress" will be displayed with a percentage
complete.
AV-30 will indicate "Calibration successfully completed Press DONE".
Push the left button under "DONE" and the calibration will be complete. If
an error is shown, repeat the calibration process.
Service Bulletin
UAV-1005757-001 Rev A
23