ABB PrimeGear ZX0 Product Manual page 26

26 PrimeGe ar Z X0 P R O D U C T M A N U A L
2.3.4.4 Mounting of the capacitive indicator on
Top bushing with capacitive indicator for busbar
is available as option in PrimeGear ZX0.
—
End of cable for connection to the capacitive voltage
Fig. 2.3.4.4.1: Made-up
indicator in the low voltage compartment
cable
End of cable for
connection to
top busbar bushing
—
Fig. 2.3.4.4.1
the busbar
The length of the cable is relevant to the
function of the indicator. The cable must
therefore not be shortened or lengthened
or otherwise modified.
The made-up cables (Fig. 2.3.4.4.1) are connected
to the indicator unit at the works, and are rolled up
at the rear of the low voltage compartment.